The first digit is half of the fan width, the “5” in “517” equals a 10 inch spray fan width (5 x 2 = 10)The last two digits are the size of the tip opening in thousandths of an inch, the “17” in “517” means the tip hole size is . 017 inch.

What do the numbers mean on a Graco spray tip?

The first number, when multiplied by 2, tells you how wide of a fan the tip will create when sprayed at a distance of 12 inches from the surface. The second two numbers are the orifice size of the tip, in thousandths of an inch, that determines how much fluid will leave the spray tip.

What is a 210 spray tip used for?

Fine finish spray tips are used for cabinetry, furniture and interior trim work (for a smooth fine finish) example Graco FF LP spray tips: 210 or 310. Low pressure tips are used primarily for spraying with pressures between 55 to 76 bar (800 to 1100 psi).

What is a 215 spray tip used for?

The 215 SwitchTip has a 0.015 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.

What is a 411 spray tip used for?

The reversible RAC IV SwitchTips are the most widely used tip for spraying a variety of coatings from lacquers to exterior paints. Use the Reverse-A-Clean (RAC) feature to quickly clear tip clogs by simply twisting the tip and spraying in the reverse position.

What is a 619 spray tip used for?

The 619 HEA tip will spray latex paint and heavy primers with 55% less overspray. The 12-14 in. spray pattern and soft feathered edges make this an ideal tip for high production exterior painting and priming applications.

What is a 311 spray tip used for?

The reversible RAC IV SwitchTips are the most widely used tip for spraying a variety of coatings from lacquers to exterior paints. Use the Reverse-A-Clean (RAC®) feature to quickly clear tip clogs by simply twisting the tip and spraying in the reverse position.

What is a 517 spray tip used for?

The reversible RAC IV SwitchTips are the most widely used tip for spraying a variety of coatings from lacquers to exterior paints. Use the Reverse-A-Clean (RAC) feature to quickly clear tip clogs by simply twisting the tip and spraying in the reverse position.

What is a 519 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings.

What is a 211 spray tip used for?

The 211 spray tip is used to work with light lacquers and spray more accurately. For example, to paint beams and window frames. To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials.

Article first time published on

What is a 413 spray tip used for?

The Reverse-A-Clean (RAC) 413 RAC IV SwitchTip is designed for narrow surfaces and thinner materials like stains and polyurethanes. The 413 SwitchTip has a 0.013 inch orifice and produces an 8 to 10 inch fan. Reverse the SwitchTip to easily clear clogs.

What size tip should I use to spray primer?

A general rule of thumb is: Heavy-bodied primers and primer surfacers work best when you use a nozzle size of 1.7 to 2.2. Basecoats should be sprayed with a 1.4 to 1.6 nozzle.

What is a 315 spray tip used for?

The 315 tip is ideal for fence picket priming and painting. The 6” fan pattern minimizes overspray when spraying pickets.

What is a 415 spray tip used for?

Achieve greater control and less overspray on different surfaces with a wide range of coatings, from stains to exterior paints. 8 inch spray pattern ideal for larger surfaces such as interior or exterior walls.

Why does my airless paint sprayer leaving streaks?

Answer: Streaks in the spray pattern, especially heavy bands at the outside edge, indicates low pressure at the tip. … Using a tip that is larger than the maximum size or a tip that is worn larger will cause low pressure. The tip should also be the proper size for the type of material being sprayed.

Do you spray ceilings or walls first?

Spray the walls before the ceiling. Allow the wall paint to fully dry, cover the walls with tape and plastic, and spray the ceiling. Masking walls is a lot easier than masking a ceiling upside down if you were to spray the ceiling before the walls.

What size airless spray tip is used to spray door frames?

Trim and Doors A blue 311 tip, or a green 310, are both fine for doors and trim, but the green 310 is what I use the most for that. The six-inch fan is wide enough to cover most base board and door frames perfectly. I use this size to spray paint cabinet doors and gutters too.

What is a .017 spray tip?

017 inch Max. This means you can use any tip that ends in 17 or lower. C: Kind of material you are spraying ( Example latex primer, or oil base stain. ) Thinner materials like oil based stains don’t need a large orifice to spray, while thicker material like latex ceiling paint will clog a smaller orifice.

Will Graco tips fit Avanti sprayer?

This AVANTI® 519 Paint Spray Tip is easy to use, easy to clean. … Fits AVANTI® and BAUER™ airless paint sprayers and most major competitors including GRACO and TITAN.

What is a 310 spray tip used for?

Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 310 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 6 to 8 inch fan pattern and a 0.010 inch orifice, ideal for thin materials. Reverse the SwitchTip to easily clear clogs.

What size tip comes with Graco Project Painter Plus?

The Project Painter Plus includes a “515” spray tip, which is great for painting large surfaces with thicker paints, but you’ll want to check the matrix (or the back of your paint can) to determine the proper tip for your job.

How do you clean an airless sprayer with acrylic paint?

You can use a stiff putty knife, wire brush or scrub pad to remove any dried on paint and gunk. After this is done rinse out the bucket and replace the dirty water with fresh. You will need to keep pumping clean water until clear water comes from the gun.

Is spray painting walls easy?

Using a powered paint sprayer is a quick and efficient way to paint a room. The preparation time might feel longer, but the short time it takes to apply the paint quickly makes up for this.

How do you measure a spray tip?

1. The first digit is half of the fan width, the “5” in “517” equals a 10 inch spray fan width (5 x 2 = 10)
2. The last two digits are the size of the tip opening in thousandths of an inch, the “17” in “517” means the tip hole size is . 017 inch.

Can you spray primer with 1.4 tip?

You are partially right my friend! a 1.4 would be ok to spray etch primer and sealer, as it is thinner, way thinner than primer. Primer is very thick and a 1.7 would be the minimum to spray it with.

What is the best tip size for clear coat?

For spraying clear coats on small parts and projects, we recommend a 1.2mm tip. For spraying a whole car, a 1.3mm tip is recommended. The 1.4mm tip is perfect for base coats and metallic as the droplet size allows the particles to self-orient to eliminate streaking and mottling.

What is a 313 tip used for?

Product Description. The reversible RAC IV SwitchTips are the most widely used tip for spraying a variety of coatings from lacquers to exterior paints. Use the Reverse-A-Clean (RAC) feature to quickly clear tip clogs by simply twisting the tip and spraying in the reverse position.

What is a 513 spray tip used for?

The Reverse-A-Clean (RAC) 513 RAC IV SwitchTip is designed for narrow surfaces and thinner materials like stains and polyurethanes. The 513 SwitchTip has a 0.013 inch orifice and produces a 10 to 12 inch fan. Reverse the SwitchTip to easily clear clogs.

What does tip size mean?

Tip Size. The size of this opening controls how much coating material can flow out through the tip. The larger the orifice, the more paint can come through it. The amount of pressure used will also influence this.

Can you use latex paint in HVLP spray?

HVLP systems are not designed to spray heavier bodied latex paint. … The pressurized cup allows the paint to be pushed to the fluid nozzle because of the added pressure behind the paint. If you look at most professional airless paint sprayers designed for latex paint, they are actually pumps, and use no air.